home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 11
/
Cream of the Crop 11-1.iso
/
lan
/
3c589x.zip
/
3C589X.EXE
/
NETWARE
/
UNSUPPOR.TED
/
README.311
< prev
next >
Wrap
Text File
|
1995-08-10
|
2KB
|
32 lines
This text file explains how to install the ODI server driver on this
diskette into a Netware 3.11 server. Since the Netware installation program
does not have driver import capability, the starting point for this process
is assumed to be after the Netware server software is already installed, but
not running yet. To install this server driver into a Netware 3.11 server,
either use the INSTALL program on this diskette or manually copy the files
to the server's hard disk. To manually install the driver, do the following
steps:
First, copy the 3C589.LAN server driver file from the \NETWARE\UNSUPPOR.TED
subdirectory on this EtherDisk to the server hard disk.
Next, copy *.NLM files from the \NETWARE\UNSUPPOR.TED\3.11 subdirectory to
same place the server driver was copied. Failure to copy and use these five
NLM files instead of the NLM files that came with the 3.11 version of Netware
may result in network failure or server abends.
Now boot the server, enter the installer, and edit the AUTOEXEC.NCF file
to add the following line (assuming the server start directory is C:\SERVER,
where the LAN drivers and NLM files were copied):
LOAD C:\SERVER\LSLENH.NLM
LOAD C:\SERVER\3C589.LAN INT=X PORT=Y MEM=ZZ00
Where INT is the IRQ the adapter is using, PORT is the hexadecimal base
address of the PC Card adapter, and MEM is the memory address the adapter
will initialize at. These can be obtained from the configuration and
diagnostic program, or you can simply enter the defaults supplied when
the driver is loaded.
%VER - Netware 3.11 Server installation release notes V1.0a